To Next Page

To Previous Page

MAINTENANCE

• Firmware

• COMBIVIS connect Runtime

• COMBIVIS HMI Runtime (only for E2-E4/L2-L4 models)

All the COMBIVIS connect Router device software components can be changed using a

very simple procedure, fully automatic, safe and fast.

The software components upgrades are distributed in the format of a single le that

works as “container” for the components to be replaced.To perform an update, copy the

".asr"leintotherootdirectoryofaUSBstick.PlugtheUSBStickintotheCOMBIVIS

connect Router device USB port and cycle the power.During the power up phase, the

COMBIVIS connect Router device recognizes the presence of the USB Stick with the

update and it will immediately start the system software update procedure.

A proper visual feedback will inform about the status of the operation.No action is re-

quested by the user.The update is completed after the COMBIVIS connect Router device

is automatically restarted.Please contact the technical support for further information.

5.5 Technical support and repairs

KEBo󰀨erswide-ranging,completeafter-salestechnicalsupport.Thesta󰀨whodealwith

thishandlequestionsontheentirerangeofproductsskillfully,quickly,ande󰀩ciently.

You can phone our sta󰀨 in the service department, and they will give you complete,

prompt advice on how to resolve your problems.

KEB Automation KG

Suedstrasse 38

32683 Barntrup, Germany

telephone +49 5263 401-0

Fax +49 5263 401-116

Email: combicontrol@keb.de

KEB C6 Instructions For Use

Other manuals for KEB C6