KEB C6 - Table 2: System Hardware Characteristics; Table 3: Electrical Characteristics; Table 4: Mechanical Characteristics; Table 5: Environmental Characteristics

58
TECHNICAL SPECIFICATIONS
LEDs Reset
Power
Run / Stop
Remote connection
COM Rx
COM Tx
3G/4G modem activity
Modem connection
Table 2: System hardware characteristics
Electrical characteristics
Power supply Type Integrated on board, auto ranging
Input voltage 9÷36 VDC with 3-pole connector
Protection Reverse polarity protection, overvoltage, solder fuse on the
PCB
These devices are intended to be connected to a “Secondary Circuit Overvoltage Category II”.
Table 3: Electrical characteristics
Mechanical characteristics
Housing Type Book mount
Material Steel, white galvanized
Table 4: Mechanical characteristics
Environmental characteristics
Temperature C6 Router
E1-E4 / L1-L4
Operation 0° … +50°C
Storage -20° … +60°C
Temperature C6
E1ET, E2ET
Operation 0° … +70°C
Storage -20° … +70°C
Humidity Operation / storage 80% (non-condensing)
Table 5: Environmental characteristics