KEB C6 - Figure 44: COMBIVIS Connect Router E2;L2 Models; Figure 45: COMBIVIS Connect Router E2;L2 Models

51
COMMISSIONING
Figure 44: COMBIVIS connect Router E2/L2 models
The following window will appear:
Figure 45: COMBIVIS connect Router E2/L2 models
Select "TCP" in the upper left list.
Write the IP address of the Router (WAN or LAN port IP)
Under "Upload Device Path", select the download path in which the project is to be
saved in the router.
The project must be transferred to the “MMCMemory” data storage.