KEB COMBIVERT F4-F - Aux-Function, Setpoint and Rotation Selection 6; AUX-Function, Setpoint and Rotation Selection.................. 6

ANTRIEBSTECHNIK
6
41
KEB COMBIVERT F4-F
Name: Basis
Functional Description
Chapter Section PageDate
© KEB Antriebstechnik, 1999
All Rights reserved
16.03.99
6.1 Operating and Unit Datas
6.2 Analog In- and Outputs
6.3 Digital In- and Outputs
6.4 Set Value and Ramp
Adjustment
6.5 Motor Data and Controller
Adjustment
6.6 Keep on Running Functions
6.7 Parameter Sets
6.8 Special Functions
6.9 Encoder Interface
6.10 Synchronous Control
6.11 Positioning Module
6.12 CP-Parameter Definition
1. Introduction
2. Summary
3. Hardware
4. Operation
5. Parameter
6. Functions
7. Start-up
8. Special Operation
9. Error Assistance
10. Project Planning
11. Networks
12. Applications
13. Annex
6.4.1 Brief Description ..................... 3
6.4.2 AUX-Function, Setpoint and
Rotation Selection .................. 4
6.4.3 Setpoint Limits........................ 7
6.4.4 Setpoint Calculation .............. 8
6.4.5 Ramp Generator .................. 10
6.4.6 Used Parameters ................. 13