KEB COMBIVERT F4-F Applications Manual

5
ANTRIEBSTECHNIK
9
15
KEB COMBIVERT F4-F
Name: Basis
19.02.01
9
Error Assistance
Section PageDate
© KEB Antriebstechnik, 2001
All Rights reserved
Chapter
Occurs when terminal F was not active at set direction clockwise or counter-clockwise
(refer to di- and Pn-Parameter for terminal handling).
Occurs when terminal R was not active at set direction clockwise or counter-clockwise
(refer to di- and Pn-Parameter for terminal handling).
Hardware error
Hardware error
Occurs when a setpoint position outside the permissible range has been selected for
the positioning (refer to Pc-Parameter).
Occurs when a setpoint position outside the permissible range has been selected for
the positioning (refer to Pc-Parameter).
Missing reference signal (zero track) at the reference drive, at Pc.10 = „4“ or „5“.
Limit switch error
Limit switch error
CPU-error
Control card defect
Software limit forward
Software limit reverse
Error incremental encoder

KEB COMBIVERT F4-F Specifications

General

Brand	KEB
Model	COMBIVERT F4-F
Category	Lifting Systems
Language	English