KEB COMBIVERT F4-F - LF-Parameter (continued)

4 2
KEB COMBIVERT F4-F
4
Name: Basis
15.12.98
© KEB Antriebstechnik, 1998
All Rights reserved
Operation Password Structure
Chapter Section Page Date
4.2.2 Passwords
4.2.3 Changing of
Password Level
By selecting one of the following passwords in CP.0 or ud.1 you can switch to the
respective password level:
Passwords Password level
DRIVE-Mode
1)
▲
START
ENTER
F/R
FUNCT
SPEED
▲
START
▲
START
FUNCT
SPEED
1) To finish the Drive-Mode press ENTER + FUNCT key for approx. 3 sec. (see
Chapter 4.4).
Example 1:
Switching from CP-Mode to
the application mode
Example 1:
Switching from application
mode to the CP-read-only
mode
▲
START
ENTER
F/R
FUNCT
SPEED
▲
START
▲
START
FUNCT
SPEED
* only CP.0
* only CP.0