KEB COMBIVERT F4-F - Page 99

19
ANTRIEBSTECHNIK
6
119
16.03.99
KEB COMBIVERT F4-F
Name: Basis
6
Functional Description
© KEB Antriebstechnik, 1999
All Rights reserved
Chapter Section PageDate
Adr.
min max
default
2C38h
1
-
0
70
Adr.
min max
default
2C37h
0,1
-
-
--
Adr.
min max
default
2C39h
1
-
0
70
In-Parameter
Indicates the software date of the control processor. The value incorporates date, month and year, at that only the last
number of the year is indicated.
Example: Display= 1507.8
Date = 15.07.98
In. 55 Software date DSP
In.57 Feedback-system channel 2
This parameter indicates for which feedback system the inverter is suited on channel 2.
0: incremental encoder input
1: synchronous-serial interface (SSI)
2...3: - reserved -
4: incremental encoder output (the input signals of channel 1 are given out on channel 2)
5..6: - reserved -
7: changeable incremental encoder input / -output
In.56 Feedback-system channel 1
This parameter indicates for which feedback system the inverter is suited on channel 1.
0: incremental encoder input
1...7: - reserved -