KEB COMBIVERT S4 - Rotation Presetting; Start Stop Run

E 38
9. Drive Mode
START
STOP
FUNC.
SPEED
ENTER
F/R
START
STOP
FUNC.
SPEED
ENTER
F/R
ENTER
F/R
9.5 Rotation Presetting
Presetting Possibilities: F = forward (clockwise rotation)
r = reverse (anti-clockwise rotation)
9.6 Start / Stop / RUN
To change from Drive Mode to CP Mode press the keys "FUNC" and
"ENTER" simultaneously and hold them for min. 3 s!
! Only possible in the status "Stop" !
Every actuation of the
ENTER-key causes a
change of the rotation.
Press key
STOP
once
Status "Stop"
Inverter
disconnected
Status "Start"
Torque at
speed "0"
Press key START
once
Press key STOP
once
Press key
START
once
START
STOP
FUNC.
SPEED
ENTER
F/R
START
STOP
START
STOP
START
STOP
FUNC.
SPEED
ENTER
F/R
START
STOP
FUNC.
SPEED
ENTER
F/R
Status "Run"
The drive runs with
the preset speed.