E 28
Password Input
The servo controller is supplied ex factory without password protection, i.e. all
programmable parameters can be changed. After the parameterizing the unit can
be locked against unauthorized access. The adjusted mode is stored.
The passwords are listed in page E 48!
Parameter
enabled
Parameter
locked
Password
1)
1) Wrong password;
repeat entry!
Parameter
locked
Parameter
enabled
Password
1)
1) Wrong password;
repeat entry!
Actual Speed Display
Display of current motor speed.
Rotation "forward": Resolution 0,5 U/min.
Rotation "reverse": Represented by negative speed with a resolution of1
U/min .
Example:
8. Parameter Description
Rotation "forward"
Rotation "reverse"
Speed1837 U/min or 1837,5 U/min
Locking of CP Parameters:
Enabling of CP Parameters:
FUNC.
SPEED
START
STOP
ENTER
F/R
START
FUNC.
SPEED
START
STOP
ENTER
F/R
START