Keba KeDrive D3-DA BG3 - Overview of KeDrive D3-DA Axis Controllers; Compact Multi-Axis System KeDrive D3

2
1
Operation Manual KeDrive D3-DA BG3 and BG4
1804.200B.1-01 Date: 03/2023
Overview, KeDrive D3-DA axis controllers
KeDrive D3-DA axis controller BG3 KeDrive D3-DA axis controller BG4
D3-DA 320/x-24xx, D3-DA 320/x-32xx, D3-DA
310/x-45xx, D3-DA 320/x-45xx, D3-DA 310/x-80xx,
D3-DA 310/x-A3xx, D3-DA 310/x-B1xx,
D3-DA310/C-C0xx
Compact multi-axis system KeDrive D3
KeDrive D3-DA axis controller
ID no.: 1804.200B.1-01
Date: 03/2023
Applicable as from: rmware V003.20-04
The German version is the original of this documentation.
Compact multi-axis system KeDrive D3
Consisting of the KeDrive D3-DP supply unit, the DC-powered KeDrive D3-DA axis
controllers and a matching controller KeDrive D3-DU, the compact KeDrive D3 drive
system offers a high degree of solutions expertise and exibility in the range from 2 A to
300 A rated current.
With the aid of the KeDrive D3-DE expansion module, the KeDrive D3-DA axis
controllers BG1 and BG2 can be combined with the KeDrive D3-DA axis controllers BG3
and BG4 without problems.
The addition to the KeDrive D3-DP supply unit BG3 and BG4 of the capacitance module
KeDrive D3-DC makes it possible to operate the axis controllers connected up to the
maximum active power permitted.
Reduction of the wiring and shortening of the installation times are just as easy to
achieve as resource-saving, cost-conscious operation.
Subject to technical change without notice.
The content of our documentation was compiled with the greatest care and attention,
and is based on the latest information available to us.
We should nevertheless point out that this document cannot always be updated
simultaneously with the ongoing technical development of our products.
Information and specications may be subject to change at any time. Please obtain
information about the latest version in our Docu Portal.