EasyManuals Logo

KEEWAY FACT 50 4T User Manual

KEEWAY FACT 50 4T
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
Remove the spark plug; check the
colors of spark plug insulators
and judge the proportion of
mixed combustible gas based on
abnormity
The spark plug insulators are black;
the exhaust muffler emits black
smoke or causes backfire if the
engine works at low speed; bad
acceleration property; instable idle
speed; flameout probability; it
works normally at high speed.
The spark plug insulators are brown
The spark plug insulators are
white; the engine may intermit
during acceleration; the
carburetor generates backfire;
insufficient power of engine
Mixed combustible gas
is too dense.
1. Check whether the air filter is
blocked.
2. Check whether the startup device
for carburetor (startup & enrichment
system) works normally.
3. Check whether the carburetor float
is too low.
Normal combustible gas mixture
Check whether the cylinder
outlet or the exhaust muffler
is blocked due to accumulated
carbon fouling.
Check the
lubrication system
Mixed combustible
gas is diluted.
1. Check whether the
fuel switch works
normally.
2. Check whether the
carburetor float is too
high.
3. Check whether the
measuring jets and
drill ways in the
carburetor are
b
locked.
Lubrication system
of the two-stroke
engine
1. Check fuel level in the
crankcase.
2. Check whether fuel in the
crankcase has low viscosity or
is dirty.
3. Check whether the fuel filter
is blocked.
4. Check whether the fuel pump
works normally.
5. Check whether the lubricant
channel is blocked.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KEEWAY FACT 50 4T and is the answer not in the manual?

KEEWAY FACT 50 4T Specifications

General IconGeneral
BrandKEEWAY
ModelFACT 50 4T
CategoryMotorcycle
LanguageEnglish

Related product manuals