7
套：boot
When loosening assembly parts, please start from outside to
inside. Small assembly parts shall be loosened first.
Complex assembly parts, such as gearbox, shall be stored in
proper order for facilitating installation in the future.
Please specially note important connections before disassembly.
Replace parts which will not be in use before disassembly.
Bolts and screws with different length shall be
separately used for different assembly parts and
shields, and they shall be correctly mounted. Insert
a bolt into a hole to check whether it is proper if
you are confused.
Fill the groove with grease before mounting an oil seal. Check
whether the oil seal is smooth or damaged during assembly.
To Next Page
Loading...
