93
7.2.2 Unsteady steering
Damaged steering handle bearing.
Low tire pressure.
Bending of the front fork or the front wheel spindle.
Deformed or unbalanced front tire.
7.2.3 Front tire shimmy
Deformed rim.
Loose front wheel bearing.
Poor tire.
7.2.4 Difficulty in wheel rolling
Failure of wheel bearing or gear housing.
7.2.5 Abnormal noise of the front absorber
Fricative sound of the absorber guard.
Loose bolts in the absorber.
7.3 Front wheel
7.3.1 Disassembly
Note:
Support the motorcycle firmly.
Loosen the mounting bolts of the brake cylinder
assembly.
Remove the brake cylinder assembly.
Place a proper holder under the engine to
lift the front wheel.
Loosen the fixing nut of the front wheel spindle（9）;
remove the front wheel spindle（1） and the front
wheel.
Remove the gear housing assembly（8）.
Remove the front brake disc.
Remove the sleeve, oil ring and bearing 6201-2RS,
and middle sleeve assembly and bearing 6201-2RS.
*Note: fro the disassembly and installation of the front wheel, see P88.
To Next Page
Loading...
Need help?
General
