KEF LS60 Wireless User Manual

10
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
6. Setting Up LS60 Wireless
6.1 Selecting an Appropriate Router
The speakers must be “onboarded” to your Wi-Fi network (see chapter
“Onboarding”) for the best sound quality, wireless streaming and comprehensive
control.
Technical Requirements of your Router
• Network standard: IEEE 802.11a/b/g/n/ac, IPv4, IPv6,
• Frequency band: Dual-band 2.4 GHz / 5 GHz
• A 5 GHz Wi-Fi network is recommended for stable streaming, especially for
hi-resolution music.
• Connecting to a guest, office or public network: Office, hotel, guest and
public networks often feature additional security or authentication methods
which may prevent the speakers from connecting. You may need the help of
the network administrator to configure the network to allow full functionality
if using these kinds of networks.

KEF LS60 Wireless Specifications

General

Power Input	100-240V, 50/60Hz
Frequency Response	31 Hz - 24 kHz (-6dB)
Connectivity	Wi-Fi, Bluetooth 4.2, Ethernet
Streaming Features	AirPlay 2 Google Chromecast UPnP Compatible
Streaming Services	Spotify Connect Tidal Amazon Music Qobuz Deezer
Input Resolution	Up to 24bit/192kHz
Supported Formats	FLAC, WAV, AIFF, ALAC, MP3, AAC, WMA
Inputs	HDMI eARC, Optical, Analog RCA, RJ45 Ethernet
Outputs	Subwoofer Out
Weight	31.2 kg per speaker
Finish Options	Mineral White, Titanium Grey, Royal Blue
Drivers	Uni-Q driver array with 19mm aluminium dome tweeter, 100mm aluminium cone midrange; 4 x 135mm aluminium cone woofers