KEF LS60 Wireless User Manual

6
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
2. General Information
2.1 Reading and Storing the User Manual
This user manual accompanies the LS60 Wireless speaker system
(hereafter referred to as the “speakers”), and contains important
information on setup and handling.
Before using your speakers, read this user manual and the safety information (as a
separate booklet) carefully. This particularly applies to the safety information. Failure to
do so may result in personal injury or damage to the speakers.
Retain the user manual and safety information for further use. Make sure to include the
user manual and safety information when passing the speakers on to third parties.
2.2 Signal Symbol/Word Definitions
The following symbols and signal words are used in this user manual.
WARNING!
This signal symbol/word designates a hazard with moderate
risk, which may result in death or severe injury if not avoided.
NOTICE!
This signal word warns of possible damage to property.
This symbol provides you with useful additional information
on handling and use.

KEF LS60 Wireless Specifications

General

Power Input	100-240V, 50/60Hz
Frequency Response	31 Hz - 24 kHz (-6dB)
Connectivity	Wi-Fi, Bluetooth 4.2, Ethernet
Streaming Features	AirPlay 2 Google Chromecast UPnP Compatible
Streaming Services	Spotify Connect Tidal Amazon Music Qobuz Deezer
Input Resolution	Up to 24bit/192kHz
Supported Formats	FLAC, WAV, AIFF, ALAC, MP3, AAC, WMA
Inputs	HDMI eARC, Optical, Analog RCA, RJ45 Ethernet
Outputs	Subwoofer Out
Weight	31.2 kg per speaker
Finish Options	Mineral White, Titanium Grey, Royal Blue
Drivers	Uni-Q driver array with 19mm aluminium dome tweeter, 100mm aluminium cone midrange; 4 x 135mm aluminium cone woofers