KEF LS60 Wireless - Selecting TV Mode; HDMI Playback Controls

42
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
12.2 Selecting TV Mode
• In the KEF Connect App, tap the TV Mode button (TV) to switch to TV Mode.
• Alternatively, press the source button on the remote control.
• If no HDMI cable is conected to the speakers and TV mode is selected, the LED
indicator light of the Primary Speaker pulses light blue.
• The LEDindicatorlightofthePrimarySpeakerilluminateslightbluebrieyandthen
fades out when HDMI connection is established.
You can assign TV mode as a second wake-up source to turn on the speakers
automatically when there is audio input through the HDMI connection. See
chapter “Power Saver – Second Wake-Up Source”.
12.3 Playback Controls
All playback controls (except adjusting volume) must be done on the connected device.
The volume can also be adjusted on the remote control.