K-MIX HARDWARE
49
4.2.6.3 – RESETTING A PRESET
Presets can be reset directly from the K-Mix hardware. Resetting a preset will overwrite one of the 12
available preset slots with K-Mix’s default, “normalled” preset.
To reset a preset on K-Mix:
1. Press and release the [PRESET] button. The [PRESET] button and the currently selected preset’s
button will light up bright. You are now in Preset Selection Mode.
2. Press and hold the [BYPS] button.
3. While [BYPS] is still held down, press one of the 12 mode buttons labelled A–L. The button will
blink four times. The selected preset is immediately overwritten with K-Mix’s default, normalled
preset.
4. That is all. If desired, you may repeat steps 2 & 3 to reset additional preset slots.
4.2.6.4 – RESETTING GLOBAL PARAMETERS
Like presets, all global parameters can be reset directly from the K-Mix hardware. Resetting the global
parameters will return every global parameter to its default state.
To reset global parameters on K-Mix:
1. Press and release the [PRESET] button. The [PRESET] button and the currently selected preset’s
button will light up bright. You are now in Preset Selection Mode.
2. Press and hold the [BYPS] button.
3. While [BYPS] is still held down, press the [PRESET] button. The button will blink while all global
parameters are returned to their default state.
4. You’re done! You did it!
To Next Page
Loading...
Need help?
General