MMEMory:LOG:NEW
Force the data logging to log into a new file.
Parameter Typical return
(none) (none)
Force the data logging to log into a new file: MMEM:LOG:NEW
– Data logging will create a new file each time when this command is executed.
MMEMory:MOVE <file1>,<file2>
Moves and/or renames <file1> to <file2>. Each file name must include the file extension.
Parameter Typical return
Any valid file name for both <file1> and <file2> (none)
Move the specified state file from the currently selected default directory to the folder "Backup" on the internal flash file system:
MMEM:MOVE "MyDAQ.sta","INT:\Backup"
–
To rename a file, specify the same folder for <file1> and <file2>.
–
To move a file to a file of the same name in a different folder, you can specify just the <drive>:<path> for <file2>.
194
Keysight DAQ970A/DAQ973A Programming Guide
2 SCPI Programming
To Next Page
Loading...
