Module hardware Instrument preset state
DAQM900A, DAQM901A, DAQM902A, DAQM908A, All Channels Open
DAQM903A, DAQM904A All Channels Open
DAQM905A Channels 11 and 21 Selected
DAQM907A Both DIO Ports = Input, Totalizer Count = 0,Both DACs = 0 VDC/0 A
[1]
DAQM909A All channels' measurement function are off
System-related operations Instrument preset state
Display State No Change
Error Queue Errors Not Cleared
Stored States No Change
Note:
[1] 0 VDC when output mode is locked to voltage (SOURce:MODE:LOCK OFF command); 0 A when output lock is
locked to current (SOURce:MODE:LOCK ON command).
Keysight DAQ970A/DAQ973A Programming Guide 25
1 Remote Operation
To Next Page
Loading...
Need help?
General
