Keysight Technologies E36100 Series - Display Subsystem; Display[:Window]:Text:clear; Display[:Window]:Text[:Data] <String>Display[:Window]:Text[:Data]; Display[:Window][:State] on | 1 | off | 0 Display[:Window][:State]

DISPlay Subsystem
DISPlay[:WINDow]:TEXT:CLEar
Clears the message displayed on the front panel.
DISPlay[:WINDow]:TEXT[:DATA] "<string>"
DISPlay[:WINDow]:TEXT[:DATA]
Displays a message of up to 12 characters on the front panel. Additional characters are truncated.
DISPlay[:WINDow][:STATe] ON | 1 | OFF | 0
DISPlay[:WINDow][:STATe]?
Turns the display off or on. When the display is turned off, outputs are not sent to the display and all
annunciators except ERROR are disabled. The display state is automatically turned on when you return
to the local mode. Press and hold [Lock/Unlock] for a few seconds to return to the local mode.