STATus:QUEStionable:ENABle <enable value>
STATus:QUEStionable:ENABle?
Enables bits in the Questionable Status enable register, which is a mask for enabling specific bits from
the Operation Event register to set the QUES (questionable summary) bit of the Status Byte register. The
selected bits are then reported to the Status Byte.
– STATus:PRESet clears all bits in the enable register.
– *CLS does not clear the enable register, but does clear the event register .
STATus:QUEStionable[:EVENt]?
Returns a decimal value corresponding to the binary-weighted sum of all bits in the Questionable Status
event register.
– These bits are latched.
– Reading the event register clears it, but *RST has no effect on this register.
To Next Page
Loading...
Need help?
General
