Notices 8
Copyright Notice 8
Manual Part Number 8
Edition 8
Published by 8
Warranty 8
Technology Licenses 8
U.S. Government Rights 9
Waste Electrical and Electronic Equipment (WEEE) 9
Declarations of Conformity 10
Safety Information 10
Safety and Regulatory Information 11
Safety Considerations 11
BEFORE APPLYING POWER 11
GROUND THE INSTRUMENT 11
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE OR WET ENVIRONMENTS 11
DO NOT OPERATE DAMAGED OR DEFECTIVE INSTRUMENTS 12
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT 12
BE CAUTIOUS WHEN DEALING WITH OUTPUTS ABOVE 60 VDC 12
USE THE POWER CORD PROVIDED 12
USE THE DEVICE AS SPECIFIED 12
CLEAN WITH SLIGHTLY DAMPENED CLOTH 13
DO NOT BLOCK VENTILATION HOLES 13
OBSERVE ALL DEVICE MARKINGS BEFORE CONNECTING TO DEVICE 13
TURN DEVICE OFF BEFORE CONNECTING TO OUTPUT TERMINALS 13
ENSURE COVER IS SECURED IN PLACE 13
Safety Symbols 14
Regulatory Markings 15
South Korean Class A EMC declaration: 15
Safety and EMC Requirements 16
1 Getting Started 18
Introduction 19
Front Panel 20
Rear Panel 21
Display 22
To Set up the Instrument 22
Options and Fuse Information 24
Ensure the correct AC input voltage and fuse settings 24
Use the proper switch settings 24
Use the correct fuse 25
Programming Ranges 26
Table of Programming and Readback Resolutions 26
Extending the Voltage Range and Current Range 27
Series connections 27
Parallel connections 27
To Next Page
Loading...
Need help?
General
