Description Lower limit Result Upper limit
CV Line Regulation (V
lowline
- V
highline
) -22 mV ______________ 22 mV
CV Ripple and Noise
– peak-to-peak
— ______________ 150 mV
– rms
— ______________ 15 mV
Transient Response — ______________ 50 μs
Constant Current Tests
Current Programming
– Zero Current Output (I
0
)
-0.0003 A ______________ 0.0003 A
– Maximum Current Ouput (I
max
)
0.3995 A ______________ 0.4005 A
Current Readback
– Zero Current measured over interface
I
0
- 0.0002 A ______________ I
0
+ 0.0002 A
– Maximum Current measured over interface
I
max
- 0.0004 A ______________ I
max
+ 0.0004 A
CC Load Regulation (I
load
- I
short
) -100 μA ______________ 100 μA
CC Line Regulation (I
lowline
- I
highline
) -100 μA ______________ 100 μA
Test Description Instrument settings
Voltage Programming & Readback, Zero Voltage (V
0
) 0 V 0.4 A
Voltage Programming & Readback, Maximum Voltage (V
max
) 100 V 0.4 A
CV Load Regulation, Line Regulation, Ripple and Noise 100 V 0.4 A
Transient Response 100 V 0.2 Ato 0.4 A
Current Programming & Readback, Zero Current (I
0
) 0 A 100 V
Current Programming & Readback, Maximum Current (I
max
) 0.4 A 100 V
CC Load Regulation, Line Regulation, Ripple and Noise 0.4 A 100 V
To Next Page
Loading...
Need help?
General
