34 Getting Started Guide
Quick Start
Turning On the Test Platform the First Time
5. Wait until you see
the green or red
color displayed in
the UXM 5G
pictorial graphic,
located in the
upper left corner
of the E7515B
Control Panel.
The changing colors of the E7515B
Control Panel pictorial graphic indicate
the “ready-state” of the UXM 5G.
Yellow indicates the UXM 5G is in the process of
becoming ready for operation.
Green indicates the UXM 5G is ready for operation.
Red indicates an error has occurred in the system
and the unit is not ready for operation. (This
requires troubleshooting, as the problem is not
expected to resolve on its own.)
6. Make sure all
required Windows
updates are made.
Windows must be configured properly
on your instrument to ensure this.
Windows updates are necessary to protect your
E7515B instrument against the latest malware and
viruses. See
“Windows Updates” on
page 41
.
7. Run the HCCU. Activate the Keysight NES Hardware Configuration
Control Utility by double-clicking the Keysight
HCCU icon on the desktop. (This utility runs within
a browser window.)
Microsoft Internet Explorer is not recommended
as the browser for this utility, because of known
compatibility issues. The recommended browser is
Google Chrome.
8. If necessary,
install the Google
Chrome browser.
The broswer can be downloaded from:
https://www.google.com/chrome/browser/
After installation, set up Chrome as the default browswer (Google provides setup instructions
for this).
Step Action Notes
To Next Page
Loading...
Need help?
General
