Keysight N8973B User Manual

Keysight NFA Series Noise Figure Analyzers Service Guide 105
Instrument Messages
Event Messages
–257 File name error;
Allowable extension
is .csv
You are using the wrong type of file extension for the current data/file type
–257 File name error;
Allowable extension
is .png
You are using the wrong type of file extension for the current data/file type
–257 File name error;
Allowable extension
is .state
You are using the wrong type of file extension for the current data/file type
–257 File name error;
Invalid file name
The filename, directory name, or volume label syntax is incorrect
–257 File name error; name
too long
–258 Media protected A legal command or query could not be executed because the media was
protected. For example, the write-protect was set
–260 Expression error An error was found with an expression type of data element. The exact problem
cannot be specifically identified
–261 Math error in
expression
An expression that has legal syntax could not be executed because of a math
error. For example, maybe you are dividing by zero
–270 Macro error Indicates that a macro-related execution error occurred
–271 Macro syntax error Indicates a syntax error within the macro definition
–272 Macro execution error Indicates that a syntactically legal macro program data sequence could not be
executed due to some error in the macro definition
–273 Illegal macro label Indicates that the macro label defined in the *DMC command was a legal string
syntax, but could not be accepted
–274 Macro parameter error Indicates that the macro definition improperly used a macro parameter
placeholder
–275 Macro definition too
long
Indicates that a syntactically legal macro program data sequence could not be
executed because the string or block contents were too long for the device to
handle
–276 Macro recursion error Indicates that a syntactically legal macro program data sequence could not be
executed because the device found it to be recursive
–277 Macro redefinition\
not allowed
Indicates that a syntactically legal macro label in the *DMC command could not
be executed because the macro label was already defined
–278 Macro header not
found
Indicates that a syntactically legal macro label in the *GMC? query could not be
executed because the header was not previously defined
–280 Program error There was an execution error in a down-loaded program. The exact problem
cannot be specifically identified
Err# Message Verbose/Correction Information

Keysight N8973B Specifications

General

Brand	Keysight
Model	N8973B
Category	Measuring Instruments
Language	English