Keysight NFA Series Noise Figure Analyzers Service Guide 353
Replaceable Parts
Replaceable Parts
Replaceable Parts
Table 14-1 All Replaceable Parts
Reference
Designator
Description Part Number
A1A1
Front Frame Assembly Replacement Kit
a
Includes:
N9020-60299
Front Frame (with the following pre-installed) N9020-20352
USB Ground Spring N9020-20258
Braided gasket 8160-0660
EMI Gasket long 8160-1997
EMI Gasket short (2 included) 8160-1998
Front Frame Side Trim Strips (plastic, 2 ea) N9020-40018
Top trim N9020-40005
Cover Plate N9020-00002
Screw, flat head M3 x 0.5 6 mm long (2 included) 0515-1946
Display Boot N9020-40002
Hole Plug, 0.25 inch 6960-0076
The following are in the kit but not installed:
Side trim, phantom gray, (adhesive, 2 included) 5041-7905
Keyboard overlay
ab
N9020-80127
Keyboard overlay
b
N9020-80168
Keyboard overlay
ab
N9000-80045
Overlay, solid left N9020-80164
Overlay, for CXA 75 ohm input
a
N9000-80046
Overlay, left for CXA TG Output
a
N9000-80104
Overlay, BBIQ Bottom
a
N9020-80166
Overlay, BBIQ top
a
N9020-80163
A1A2 Front Panel Control Board N9020-63274
A1A3 Liquid Crystal Display 10.6-in w/PCAP Touch 1280X768-Pixels 2090-1103
A1A4 Keyboard, PCA N9020-63294