Keysight NFA Series Noise Figure Analyzers Service Guide 17
Overview
Analyzer Accessories
The Keysight 11947A Transient Limiter protects the analyzer input circuits from
damage due to signal transients. It specifically is needed for use with a line
impedance stabilization network (LISN). It operates over a frequency range of
9 kHz to 200 MHz, with 10 dB of insertion loss.
Power Splitters
The Keysight 11667A/B/C power splitters are two-resistor type splitters that
provide excellent output SWR, at 50 Ω impedance. The tracking between the
two output arms, over a broad frequency range, allows wideband
measurements to be made with a minimum of uncertainty.
11667A: DC to 18 GHz
11667B: DC to 26.5 GHz
11667C: DC to 50 GHz
Static Safe Accessories
9300-1367 Wrist-strap, color black, stainless steel. Four adjustable
links and a 7 mm post-type connection.
9300-0980 Wrist-strap cord 1.5 m (5 ft.)
To Next Page
Loading...
Need help?
General
