24
Fixed Height Back Post
1. For the fixed height back post, install the rigidizer bar (D), screws (A & C), threaded barrels (B) and
plugs (E) using two 3mm Allen wrenches.
NOTE: The fixed height back post, standard push handle and fold down push handle upper backs
are shown in the image below. The standard push handle and fold down push handle upper backs
also require sleeves, upper post assemblies and the handle hardware. See image below for details.
Fixed Height Back Post
Fold Down Push Handle
Standard Push Handle
A
B
C
D
E
E
To Next Page
Loading...