65
Wheelbase Width Adjustment
Adjusting the wheelbase width allows the rider the option to move the wheels closer or further away from
the hips. It also compensates for camber adjustment and gives the proper wheel spacing to maximize
pushing efficiency.
To Adjust the Wheelbase Width
1. Remove the lower base mounts (B) by removing two bolts (A) per side using a 3mm Allen wrench. If
anti-tips are present, the image will look different, but the process is the same.
2. Move the dimple clip (C) to the dimple on the camber plug (D) that provides the desired spacing.
3. Repeat on opposite side.
4. When both sides are spaced equally, tighten the bolts (A) to 70 in/lbs.
To Next Page
Loading...