54
Rogue XP 5th Wheel
2. Install the caster (D) into the 5th wheel mount forks with two screws (A), threaded barrel (B) and two
caster spacers (C) using two 4mm Allen wrenches.
3. Center the dynamic 5th wheel mounting clamp and secure in place by installing two screws (D), two
washers (B) and two nuts (A) using a 5mm Allen wrench and a 10mm wrench. Install the two screws (F),
a threaded barrel (E) and indexing plunger (G) using two 3mm Allen wrenches. Install the 5th wheel into
the clamp and secure in place by pulling the index plunger out, inserting the 5th wheel and then
releasing the index plunger. The index plunger secures the 5th wheel in place when reinserted into the
5th wheel tube hole.
D
A
B
C
G
E
F
Hole that index
plunger settles in
when 5th wheel
arm assembly is
secure.
To Next Page
Loading...