25
4
4
Features of your vehicle Driver position memory system
僅 While recalling the stored positions,
pressing one of the control buttons
for the driver's seat, outside rearview
mirror will cause the movement of
that component to stop and move in
the direction that the control button is
pressed.
Driver position memory system
reset
If the driver position memory system
does not work properly, initialize the sys
-
tem as follows.
How to initialize:
1. Stop the vehicle and open the driver's
door with the ENGINE START/STOP
button in the ON position and the
vehicle shifted to P (Park).
2. Pull the driver's seat forward as far as
possible and have the seatback
upright as much as possible using the
driver's seat forward/backward
adjustment and seatback angle
(recline) switches.
3. Push the SET button and seat forward
movement switch for 2 seconds
simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will automati
-
cally move backwards. The alarm
sound will continue while the system
is in operation.
3. Initialization will be complete after the
seat and seatback move to the center
with an alarm sound. If, however,
cases as follows occur, the initializa
-
tion process will come to a stop and
the alarm sound will stop as well.
僅 When pushing driving position mem
-
ory system button
僅 When pushing driver's seat height
adjustment switch
僅 When shifting from P (Park) to other
positions
僅 When driving speed exceeds 2 mph
(3.2 km/h)
僅 When the driver's door is closed
Easy access function (if
equipped)
The system will move the driver's seat
automatically as follows:
With smart key system
僅 It will move the driver's seat rearward
when the ENGINE START/STOP but
-
ton is in the OFF position and the
driver's door is opened.
僅 It will move the driver's seat forward
when the vehicle is turned ON or the
driver's door is closed with the smart
key with you.
You can activate or deactivate the Easy
Access Function from the User Settings
Mode on the LCD display. For more
details, refer to "LCD display" on page 4-
68. If your vehicle is equipped with an
infotainment system, you can learn how
to setup on the website via QR code in
the infotainment quick reference guide.
Upward/downward movement of the
seat may not work when passengers get
in/out of the vehicle in order to prevent
foot injuries in certain places.
The infotainment system may change
after software updates. For more infor
-
mation, refer to the user's manual pro
-
vided in the infotainment system and
the quick reference guide.