35
4
4
Features of your vehicle Windows
Always check for obstructions before
raising any window to avoid injuries or
vehicle damage. If an object less than
0.16 of an inch (4 mm) in diameter is
caught between the window glass and
the upper window channel, the auto
-
matic reverse window may not detect
the resistance and will not stop and
reverse direction.
The automatic reverse feature doesn't
activate while resetting the power win
-
dow system. Make sure body parts or
other objects are safely out of the way
before closing the windows to avoid inju
-
ries.
Do not install any accessories in the
vehicle that extend into the open win
-
dow area. Such objects could prevent
the automatic reverse feature from
functioning.
Power window lock button
The driver can disable the power win
-
dow switches on the rear passengers'
doors by pressing the power window
lock button to the lock position
(pressed).
When the power window lock button is
pressed:
僅 The driver's master control can oper
-
ate all passengers' power windows.
僅 The front passenger's control can
operate the front passenger's power
window.
僅 The rear passengers' control cannot
operate the rear passenger's power
window.
* If the power window lock switch is
operated (indicator turns on), rear pas
-
senger cannot open the rear door. (if
equipped with the Electronic Child
Safety Lock System.) For more details,
refer to "Electronic child safety lock
system (if equipped)" on page 4-21.
僅 To prevent possible damage to the
power window system, do not open or
close two windows or more at the
same time. This will also ensure the
longevity of the fuse.
ODL3H049015
To Next Page
Loading...
Need help?
General
