69
6
6
Driver assistance system Smart Cruise Control (SCC)
Refer to the picture for the detailed loca
-
tion of the detecting sensor.
Always keep the front view camera and
front radar in good condition to maintain
optimal performance of Smart Cruise
Control.
For more details on the precautions of
the front view camera and front radar,
refer to "Forward Collision–Avoidance
Assist (FCA) (Sensor fusion) (if
equipped)" on page 6-16.
Smart Cruise Control settings
To turn on Smart Cruise Control
僅 Press the Driving Assist button to
turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster.
僅 If there is no vehicle in front of you,
the set speed will be maintained, but if
there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead. If the
vehicle ahead accelerates, your vehi
-
cle will travel at a steady cruising
speed after accelerating to the set
speed.
If your driving speed is between 0~ 20
mph (0~ 32 km/h) when you press the
Driving Assist button, Smart Cruise
Control speed will be set to 20 mph (32
km/h).
To set vehicle distance
Each time the button is pressed, the
Vehicle Distance changes as follows:
僅 If you drive at 56 mph (90 km/h), the
distance is maintained as follows:
Distance 4 - approximately 172 ft.
(52.5 m)
Distance 3 - approximately 130 ft. (40
m)
Distance 2 - approximately 106 ft.
(32.5 m)
Distance 1 - approximately 82 ft. (25
m)
僅 The distance is set to the last set dis
-
tance when the engine is restarted, or
ODL3A051344