Driving your vehicle
405
Brake system
Operating ESC
Never press the ESC OFF button while
ESC is operating (ESC indicator light
blinks).
If ESC is turned off while ESC is operat
-
ing, the vehicle may slip out of control.
僅 When operating the vehicle on a
dynamometer, ensure that the ESC is
turned off (ESC OFF light appeared). If
the ESC is left on, it may prevent the
vehicle speed from increasing, and
result in false diagnosis.
僅 Turning the ESC off does not affect
ABS or brake system operation.
Vehicle Stability Management
(VSM) system
The Vehicle Stability Management (VSM)
provides further enhancements to vehi
-
cle stability and steering responses
under the following condition:
僅 when driving on a slippery road or
僅 when a change in the coefficient of
friction between left and right wheels
is detected.
Tire/wheel size
When replacing tires and wheels, make
sure they are the same size as the origi
-
nal tires and wheels installed. Driving
with varying tire or wheel sizes may
diminish any supplemental safety bene
-
fits of the VSM system.
VSM operation
When the VSM is operating properly,
you can feel a slight pulsation in the
vehicle and/or abnormal steering
responses (Motor Driven Power Steering
(MDPS)). This is only the effect of brake
and MDPS control and indicates nothing
unusual.
The VSM does not operate when:
僅 Driving on a sloping road such as a
gradient or incline
僅 Driving in reverse
僅 ESC OFF indicator light remains
on the instrument cluster
僅 MDPS indicator light remains on the
instrument cluster
VSM operation off
If you press the ESC OFF button to turn
off the ESC, the VSM will also cancel and
the ESC OFF indicator light appears.
To turn on the VSM, press the button
again. The ESC OFF indicator light goes
out.
Vehicle Stability Management
Drive carefully even though your vehicle
has Vehicle Stability Management. It can
only assist you in maintaining control of
the vehicle under certain circumstances.
To Next Page
Loading...
Need help?
General
