Driver assistance system
906
Lane Following Assist (LFA)
as uneven road surfaces, narrow
lanes, etc.
This device complies with Part 15 of
the FCC rules.
Operation is subject to the following
three conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interfer
-
ence received, including interference
that may cause undesired operation.
3. Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
device.
Radio frequency radiation exposure
information:
This equipment complies with FCC radi
-
ation exposure limits set forth for an
uncontrolled environment. This equip
-
ment should be installed and operated
with minimum distance of 8 in (20 cm)
between the radiator (antenna) and your
body.This transmitter must not be colo
-
cated or operating in conjunction with
any other antenna or transmitter.
Lane Following Assist (LFA)
Lane Following Assist is designed to help
detect lane markings and/or vehicles on
the road, and assists the driver's steering
to help keep the vehicle between lanes.
Detecting sensor
[1]: Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
and front vehicles.
Refer to the picture for the detailed loca
-
tion of the detecting sensor.
For more details on the precautions of
the front view camera, refer to "Forward
Collision–Avoidance Assist (FCA) (Front
view camera only)" on page 6-4.
To Next Page
Loading...
Need help?
General
