Safety features of your vehicle
83
Seat
Wrinkles or abrasions may appear natu
-
rally from usage. It is not a fault of prod
-
uct. Wrinkles or abrasions are not
covered by warranty.
Front seat adjustment for man
-
ual seat
The front seat can be adjusted by using
the control levers located on the outside
of the seat cushion.
Moving forward and backward
Adjust the seat before driving, and make
sure the seat is locked securely by trying
to move forward and backward without
using the lever. If the seat moves, it is
not locked properly.
To move the seat forward or backward:
1. Pull the seat slide adjustment lever up
and hold it.
2. Slide the seat to the position you
desire.
3. Release the lever and make sure the
seat is locked in place.
Reclining seatback
To recline the seatback:
1. Lean forward slightly and lift up the
seatback recline lever.
2. Carefully lean back on the seat and
adjust the seatback of the seat to the
position you desire.
3. Release the lever and make sure the
seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)
Reclining seatback
Sitting in a reclined position when the
vehicle is in motion can be dangerous.
Even when buckled up, the protections
of your restraint system (seat belts and/
or air bags) is greatly reduced by reclin
-
ing your seatback.
Seat belts must be snug against your
hips and chest to work properly. When
the seatback is reclined, the shoulder
belt cannot do its job because it will not
be snug against your chest. Instead, it
will be in front of you. During an acci
-
dent, you could be thrown into the seat
belt, causing neck or other injuries.
ODL3A030002
ODL3A030003
To Next Page
Loading...
Need help?
General
