97
4
4
Features of your vehicle Lighting
Auto light
When the light switch is in the AUTO
light position, the taillights and head
-
lights will turn ON or OFF automatically
depending on the amount of light out
-
side the vehicle.
僅 Never place anything over the sensor
(1) located on the instrument panel as
this will ensure better auto-light sys
-
tem control.
僅 Don't clean the sensor using a window
cleaner, the cleaner may leave a light
film which could interfere with sensor
operation.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windshield, the Auto light system
may not work properly.
Operating high beam
To turn on the high beam headlight:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams are
switched on.
High beams
Do not use high beam when there are
other vehicles in front of or approaching
your vehicle. Using high beam could
obstruct the other driver's vision.
ODL3H041092
To Next Page
Loading...
