Features of your vehicle
984
Lighting
To flash the headlights:
僅 Pull the lever towards you.
It will return to the normal (low beam)
position when released. The head
-
light switch does not need to be on to
use this flashing feature.
Operating turn signals and lane
change signals
The ENGINE START/STOP button must
be on for the turn signals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
The lever will return to the OFF posi
-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit. The bulb may require replace
-
ment.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7) by
selecting "User Settings →Lights → One
Touch Turn signal".
If the turn signal indicator stays on and
does not flash, or if it flashes abnormally,
a bulb may be burned out or have a
poor electrical connection in the circuit.
The bulb may require replacement.
ODL3H041411
ODL3H041412
To Next Page
Loading...
Need help?
General
