Features of your vehicle
804
LCD display
Drive Info display
This display shows the trip distance (1),
the average fuel efficiency (2), and the
total driving time (3) information once
per one ignition cycle.
僅 Fuel efficiency is calculated after the
vehicle has run for more than 0.19
miles (300 m).
僅 If opening the driver's door after turn
-
ing off the engine or 3 minutes passes
after restarting the engine, Driving
Information is reset.
僅 If you press "OK" button for more than
1 second after the Driving Information
is displayed, the information will be
reset.
僅 If the engine is running, even when
the vehicle is not in motion, the infor
-
mation will be accumulated.
The vehicle must be driven for a mini
-
mum of 0.19 miles (300 m) since the last
ignition cycle before the average accu
-
mulated driving information is recalcu
-
lated.
Service mode
This mode reminds you of scheduled
maintenance information.
Service in
It calculates and displays when you need
a scheduled maintenance service (mile
-
age or days).
If the remaining mileage or time reaches
900 miles (1,500 km) or 30 days, "Ser
-
vice in" message is displayed for several
seconds each time you set the ENGINE
START/STOP button to the ON position.
Service required
If you do not have your vehicle serviced
according to the already inputted ser
-
vice interval, "Service required" message
is displayed for several seconds each
time you set the ENGINE START/STOP
button to the ON position.
To reset the service interval to the mile
-
age and days you inputted before:
僅 Press the OK button (Reset) for more
than 1 second.
To use the service interval menu, consult
an authorized Kia dealer.
To Next Page
Loading...
