Features of your vehicle
1004
Lighting
僅 Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
僅 For more details on the precautions of
the front view camera, refer to "For
-
ward Collision–Avoidance Assist (FCA)
(Front view camera only)" on page 6-
4.
High Beam Assist setting
With the ENGINE START/STOP button in
the ON position, select 'Lights → High
Beam Assist' from the Settings menu to
turn on High Beam Assist and deselect
to turn off the function.
For your safety, change the Settings
after parking the vehicle at a safe loca
-
tion.
High Beam Assist operation
Display and control
僅 After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the proce
-
dure below.
- Place the headlamp switch in the
AUTO position and push the head
-
lamp lever towards the instrument
cluster. High Beam Assist indi
-
cator light will appear on the cluster
and the function will be enabled.
- When the function is enabled, high
beam will turn on when vehicle
speed is above 25 mph (40 km/h).
When vehicle speed is below 15
mph (25 km/h), high beam will not
turn on.
- The High Beam indicator light
will appear on the cluster when
high beam is on.
僅 When High Beam Assist is operating,
if the headlamp lever or switch is
used, the function operates as follow:
- If the headlamp lever is pulled
towards you when the high beam is
off, the high beam will turn on with
-
out High Beam Assist canceled.
When you let go of the headlamp
lever, the lever will move to the
middle and the high beam will turn
off.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the function will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
To Next Page
Loading...
Need help?
General
