127
4
4
Features of your vehicle Interior features
Temperature control (Manual)
僅 Each time you press the levers/switch,
the temperature setting of the seat
will change as follows:
-Front seat
-Rear seat
Temperature control (Automatic)
The seat warmer starts to automatically
control the seat temperature in order to
prevent low-temperature burns after
being manually turned ON.
You may manually press the button to
increase the seat temperature. However,
it soon returns to the automatic mode
again.
僅 When pressing the levers/switch for
more than 1.5 seconds with the seat
warmer operating, the seat warmer
will turn OFF.
With the seat warmer levers/switch in
the ON position, the heating system in
the seat turns off or on automatically
depending on the seat temperature.
僅 When cleaning the seats, do not use
an organic solvent such as paint thin
-
ner, benzene, alcohol and gasoline.
Doing so may damage the surface of
the heater or seats.
僅 To prevent overheating the seat
warmer, do not place anything on the
seats that insulates against heat, such
as blankets, cushions or seat covers
while the seat warmer is in operation.
僅 Do not place heavy or sharp objects
on seats equipped with seat warmers.
Damage to the seat warming compo
-
nents could occur.
僅 Do not change the seat cover. It may
damage the seat warmer or air venti
-
lation system.
Seat warmer burns
Passengers should use extreme caution
when using seat warmers due to the
possibility of excess heating or burns.
The seat warmer may cause burns even
at low temperatures, especially if used
for long periods of time. In particular, the
driver must exercise extreme care for
the following types of passengers:
1. Infants, children, elderly or handi
-
capped persons, or hospital outpa
-
tients
2. Persons with sensitive skin or those
that burn easily
3. Fatigued individuals
4. Intoxicated individuals
5. Individuals taking medication that can
cause drowsiness or sleepiness
(sleeping pills, cold tablets, etc.)
To Next Page
Loading...
Need help?
General
