43
6
6
Driver assistance system Blind-Spot Collision-Avoidance Assist (BCA)
- Forward Collision-Avoidance Assist
is operating
僅 After Blind-Spot Collision-Avoidance
Assist operation or changing lane, you
must drive to the center of the lane.
Blind-Spot Collision-Avoidance Assist
will not operate if the vehicle is not
driven in the center of the lane.
Take the following precautions when
using Blind-Spot Collision-Avoidance
Assist:
僅 For your safety, change the Settings
after parking the vehicle at a safe
location.
僅 If any other function’s warning mes
-
sage is displayed or audible warning
is generated, Blind-Spot Collision-
Avoidance Assist's warning message
may not be displayed and audible
warning may not be generated.
僅 You may not hear the warning sound
of Blind-Spot Collision-Avoidance
Assist if the surrounding is noisy.
僅 Blind-Spot Collision-Avoidance Assist
may not operate if the driver applies
the brake pedal to avoid collision.
僅 When Blind-Spot Collision-Avoidance
Assist is operating, braking control by
the function will automatically cancel
when the driver excessively depresses
the accelerator pedal or sharply steers
the vehicle.
僅 During Blind-Spot Collision-Avoidance
Assist operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have the
seat belt on and keep loose objects
secured.
僅 Even if there is a problem with Blind-
Spot Collision-Avoidance Assist, the
vehicle's basic braking performance
will operate normally.
僅 Blind-Spot Collision-Avoidance Assist
does not operate in all situations or
cannot avoid all collisions.
僅 Blind-Spot Collision-Avoidance Assist
may warn the driver late or may not
warn the driver depending on the
road and driving conditions.
僅 Driver should maintain control of the
vehicle at all times. Do not depend on
Blind-Spot Collision-Avoidance Assist.
Maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop the
vehicle.
僅 Never operate Blind-Spot Collision-
Avoidance Assist on people, animal,
objects, etc. It may cause serious
injury or death.
The brake control may not operate
properly depending on the status of ESC
(Electronic Stability Control).
There will only be a warning when:
僅 The ESC (Electronic Stability Control)
warning light is on
僅 ESC (Electronic Stability Control) is
engaged in a different function
To Next Page
Loading...
Need help?
General
