Driver assistance system
866
Navigation-based Smart Cruise Control (NSCC)
'Drive carefully' warning message will
appear in the following circumstances:
僅 Navigation-based Smart Cruise Con
-
trol is not able to slow down your
vehicle to a safe speed
Highway Curve Zone Auto Slowdown
and Highway Set Speed Auto Change
function use the same symbol.
Highway Curve Zone Auto Slow
-
down
僅 Depending on the curve ahead on the
highway (or motorway), the vehicle
will decelerate, and after passing the
curve, the vehicle will accelerate to
Smart Cruise Control set speed.
僅 Vehicle deceleration time may differ
depending on the vehicle speed and
the degree of the curve on the road.
The higher the driving speed, deceler
-
ation will start faster.
Highway Set Speed Auto Change
僅 Highway Set Speed Auto Change
function will operate when Smart
Cruise Control set speed and the
highway (or motorway) speed limit is
matched.
僅 While Highway Set Speed Auto
Change function is operating, when
the highway (or motorway), speed
limit changes, Smart Cruise Control
set speed automatically changes to
the changed speed limit.
僅 If Smart Cruise Control set speed is
adjusted different from the speed
limit, Highway Set Speed Auto
Change function will be in the standby
state.
僅 If Highway Set Speed Auto Change
function has changed to the standby
state by driving on a road other than
the highway (or motorway) main road,
Highway Set Speed Auto Change
function will operate again when you
drive on the main road again without
setting the set speed.
僅 If Highway Set Speed Auto Change
function has changed to the standby
state by depressing the brake pedal
or pressing the button on the
steering wheel, press the switch
to restart the function.
僅 Highway Set Speed Auto Change
function does not operate on highway
interchanges or junctions.
僅 Highway Set Speed Auto Change
function only operates based on the
speed limits of the highway (or motor
-
way), it does not work with the speed
cameras.
僅 When Highway Set Speed Auto
Change function is operating, the