21
3
3
Safety features of your vehicle Seat belts
locking operation mode, allow the
unbuckled seat belt to fully retract.
Do NOT fold down the left portion of the
rear seatback when the rear center seat
belt is buckled. ALWAYS UNBUCKLE the
rear center seat belt before folding down
the left portion of the rear seatback. If
the rear center seat belt is buckled when
the left portion of the rear seatback is
folded down, distortion and damage to
the top portion of the seatback and seat
belt garnish may result, causing the
seatback to lock into the folded down
position.
The seat belt should be locked into the
buckle on each seat cushion to be prop
-
erly fastened.
1. Rear right seat belt fastening buckle
2. Rear center seat belt fastening buckle
3. Rear left seat belt fastening buckle
Prior to fastening the rear seat belts,
ensure the latch matches the seat belt
buckle. Forcefully fastening the left or
right seat belt to the center buckle can
result in an improper fastening scenario
that will not protect you in an accident.
When using the rear center seat belt, the
buckle with the "CENTER" mark must be
used.
Stowing the rear seat belt
The rear seat belt buckles can be stowed
in the pocket between the rear seatback
and cushion when not in use.
1. Route the seat belt webbing through
the rear seat belt guides. It will help
keep the belts from being trapped
behind or under the seats.
2. After inserting the seat belt, tighten
the belt webbing by pulling it up.
To Next Page
Loading...
Need help?
General
