121
6
6
Driver assistance system Rear Cross-Traffic Collision-Avoidance Assist (RCCA)
If the engine is restarted, Warning Tim
-
ing and Warning Volume will maintain
the last setting.
Warning Timing
With the ENGINE START/STOP button in
the ON position, select 'Driver Assistance
→ Warning Timing' from the Settings
menu to change the initial warning acti
-
vation time for Rear Cross-Traffic Colli
-
sion-Avoidance Assist.
When the vehicle is first delivered, Warn
-
ing Timing is set to 'Standard'. If you
change the Warning Timing, the warning
time of other Driver Assistance systems
may change.
僅 The setting of the Warning Timing
applies to all functions of the Rear
Collision-Avoidance Assist.
僅 Even though 'Standard' is selected for
Warning Timing, if the vehicles from
the left and right side approaches at
high speed, the initial warning activa
-
tion time may seem late.
僅 Select 'Late' for Warning Timing when
traffic is light and when driving speed
is slow.
Warning Methods
You can adjust the Warning Methods
with the ignition switch or ENGINE
START/ STOP button in the ON position.
僅 Warning Volume : Select 'User Set
-
tings → Driver Assistance → Warning
Volume' on the instrument cluster or
'Settings → Vehicle → Driver Assis
-
tance → Warning Methods → Warn
-
ing Volume' on the Infotainment
system.
僅 Ensure that Warning Methods you
have set may apply to the warning
volume of other driver assistance sys
-
tems.
僅 Warning Methods will maintain its last
setting even if the vehicle is restarted.
To Next Page
Loading...
Need help?
General
