Maintenance
668
Light bulbs
Interior lamps
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
1. Engage the parking brake, shift to P
and turn the ignition OFF.
2. Turn off the lamp.
3. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
4. Remove the bulb by pulling it straight
out.
5. Install a new bulb in the socket.
6. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
If the map lamp bulb/LED (1) does not
operate, have the vehicle checked by an
authorized Kia dealer.
The LED lamp cannot be replaced as a
single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit.
A skilled technician should check or
repair the map lamp (LED), for it may
damage related parts of the vehicle.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Replacing vanity mirror lamp
bulb (Bulb type) (if equipped)
Interior lamps
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
To replace the bulb:
1. Engage the parking brake, shift to P
and turn the ignition OFF.
2. Turn of the lamp.
3. Using a flat-blade screwdriver, gently
pry the lamp assembly from interior.
4. Remove the bulb by pulling it straight
out.
5. Install a new bulb in the socket.
6. Install the lamp assembly to interior.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
ODL3079054
To Next Page
Loading...
Need help?
General
