M0290-01Model 4900
1-4 Rev. 8/19
TM
Overview
TOOLS REQUIRED
Hardware Size / Tool Required
/" = /" /" = /"
(nut for /" hardware uses /" tool)
/" = 1/" 1/" = 1/"
/" = /" /" = /" /" = 1/" 1/" = 2/"
/" = /" /" = /" 1" = 1/"
Information used in these instructions was current at time of printing. However, due to Kinze’s ongoing product
improvement, production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing,
Inc. reserves the right to change specifications or design without notice and without incurring obligation to install the
same on machines previously manufactured. To obtain the most recent version of your publication, please contact your
Kinze dealer.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing direction machine
travels in use unless otherwise stated.
To Next Page
Loading...
