M0290-01Model 4900
1-6 Rev. 8/19
TM
Specifications
Tractor Hydraulic Requirements and Use of Power Beyond
The Power Beyond hydraulic system is used as a pressure/flow source for additional functions equipped with indepen-
dent flow control valves; for example, bulk fill fan. Possible scenarios include:
• Tractor Selective Control Valve (SCV) control is not needed.
• No other SCV outlet is available.
The major difference between SCV and Power Beyond is than an SCV has built-in pressure/flow compensation
whereas Power Beyond requires an external load signal.
Kinze suggests that if Power Beyond must be used, only the bulk fill circuit be connected using all three connections
(Pressure, Return, Load Sense). Consult your tractor manufacturer to ensure proper connection, hydraulic flow,
pressure and heat dissipation are met.
For more information on Power Beyond for remote hydraulic connections, refer to the tractor Operator's Manual.
Specification Conventional Hoppers Bulk Fill
Transport Tire Size (4)
255-70R 22.5 11- 22.5
14 PR
11- 22.5
14 PR
255-70R 22.5 11- 22.5
14 PR
11- 22.5
14 PR
Transport Tire Pressure
100 psi 90 psi 90 psi 100 psi 90 psi 90 psi
Wing Tires
7.5" x 20"
(2)
7.5" x 20"
(4)
11- 22.5
(4)
7.5" x 20"
(2)
7.5" x 20"
(4)
11- 22.5
(4)
Field Tire Pressure
40 psi 40 psi 90 psi 40 psi 40 psi 60 psi
Piston Pump Drive Tires
(Optional)
(2) 7.60" x 15"
Field Lift
12 Row - Four Master/Two Slave Hydraulics
16/24 Row - Four Master/Four Slave Hydraulics
Row Markers
Independently controlled, three stage fold, disk blade depth bands.
Tire Specifications
To Next Page
Loading...
