6. SET THE THROTTLE LEVER TO
ABOUT HALF WAY
5. MOVE THE POSITION CONTROL
LEVER FORWARD.
To lower implement, move the posi-
tion control lever forward.
(1) Position Control Lever
(A) "DOWN"
(1) Hand Throttle Lever
"INCREASE"
"DECREASE"
(1) Clutch Pedal
7. DEPRESS THE CLUTCH PEDAL.
8. TURN THE KEY TO “START” PO
-
SITION AND RELEASE WHEN
THE ENGINE STARTS.
621O506A621O505A621O504A
IMPORTANT
The engine will not start un-
less the range gear shift lever
(Hi-Lo) and the P.T.O clutch le-
ver are in the “OFF” position.
To Next Page
Loading...
