Kistler 9287C Series - Center of Pressure (COP) Accuracy; COP Error Aax Details; COP Error Aay Details

Multicomponent Force Plate for Biomechanics Type 9287C…
7. Trouble Shooting
Please refer to the instruction manual 002-034 "Force
Plate Installation and Maintenance" for detailed pro-
cedures and information.
7.1 Defective Force Plate
Proceed as follows if your force plate is defective:
 Contact your Kistler distributor and advise him that you
are sending in the defective instrument
 Send the defective force plate in its original packing to
your Kistler distributor
 Give an exact description of the trouble and the ac-
companying circumstances together with the force
plate
 Describe the measuring operation being performed
when the fault occurred
 If a major repair is involved, you will receive a cost es-
timate
 Kistler will endeavour to repair your force plate as
quickly as possible and at minimum cost, and to return
it as good as new
 After any repair the force plate is recalibrated in the
works
Pag
e 28 9287C_002-462e-03.11